Kinetic code run for: --> Solar longitude 180.00 [deg]. --> Solar declination angle 0.00 [deg]. --> Timestep 1. --> Universal time 12.0 [hr]. STATPROXY.F : Setting up parameters. You requested output over ALL latitudes covering longitudes from 45.0 degrees East through to 60.0 degrees East. Double-check: START 45.0 END 60.0. ----> GRITRAV : calculating the energy grid. ----> "icont(3) = 5" power law energy grid. ----> ----> GRIDPOLO : (within MISC.f) calculating the energy grid with a decreasing power law. ----> GRITRAV : everything fine with "centE". ----> GRITRAV : everything fine with "ddeng". ----> GRITRAV : *** adjusting lowest energy to "ebot 0.001" rather than "einf 0.100" ***. "icont(4) = 2" power law altitude grid ----> GRIDPOW : calculating the altitude grid with a decreasing power law. STATPROXY : everything fine with "alt". STATPROXY : "icont(2) = 0" zero flux STATPROXY : Writing fixed handover variables. STATPROXY.F FIXED MODEL SETTINGS ---------------------------------- Number of neutral species considered ("nspec") = 6, ID # ("km") = 1. Altitude Grid Parameters ------------------------ "nalt" = 81 : Number of altitude grid points "zbot" = 80.00 : Minimum altitude "ztop" = 350.00 : Maximum altitude Neutral atmosphere parameters ----------------------------- "jpreci" = 0 : 0 if sun only, 1 if precipitation only, 2 if both "tinf" = 1.00 : Exospheric temperature "Apind" = 1.00 : Magnetic index "albedo" = 1.00 : Albedo at the lowest altitude The altitude grid ("alt(i),i=1,nalt") 350.00 343.29 336.67 330.13 323.67 317.30 311.02 304.82 298.70 292.67 286.72 280.85 275.08 269.38 263.77 258.24 252.80 247.44 242.17 236.98 231.88 226.85 221.92 217.07 212.30 207.62 203.02 198.50 194.07 189.73 185.47 181.29 177.20 173.19 169.27 165.43 161.68 158.00 154.42 150.92 147.50 144.17 140.92 137.75 134.68 131.68 128.77 125.94 123.20 120.54 117.97 115.48 113.07 110.75 108.52 106.37 104.30 102.32 100.42 98.60 96.88 95.23 93.67 92.19 90.80 89.49 88.27 87.13 86.07 85.10 84.22 83.42 82.70 82.07 81.52 81.05 80.68 80.38 80.17 80.04 80.00 The Energy Grid [eV] in Descending Order --------------------------------------- "nen" = 80 : Number of energy levels "spfac" = 1.0572135 : Power law growth factor "ezero" = 0.00 : Mean E(max w) "alpha" = 10.00 : thingy Bottom energy ("botE(i), i=1,nen") 1.0000000E-03 2.0000000E-01 4.0000004E-01 6.2288541E-01 8.4708029E-01 1.0955446E+00 1.3467820E+00 1.6238360E+00 1.9052989E+00 2.2143075E+00 2.5295537E+00 2.8742778E+00 3.2272832E+00 3.6119273E+00 4.0071363E+00 4.4363976E+00 4.8787785E+00 5.3579092E+00 5.8530130E+00 6.3878832E+00 6.9419155E+00 7.5390854E+00 8.1589823E+00 8.8257856E+00 9.5192976E+00 1.0263930E+01 1.1039723E+01 1.1871345E+01 1.2739104E+01 1.3667953E+01 1.4638503E+01 1.5676023E+01 1.6761463E+01 1.7920444E+01 1.9134296E+01 2.0429035E+01 2.1786411E+01 2.3232887E+01 2.4750683E+01 2.6366756E+01 2.8063850E+01 2.9869480E+01 3.1766979E+01 3.3784481E+01 3.5905964E+01 3.8160275E+01 4.0532116E+01 4.3051105E+01 4.5702763E+01 4.8517590E+01 5.1481998E+01 5.4627476E+01 5.7941456E+01 6.1456501E+01 6.5161194E+01 6.9089294E+01 7.3230698E+01 7.7620483E+01 8.2249985E+01 8.7155792E+01 9.2330841E+01 9.7813416E+01 1.0359822E+02 1.0972545E+02 1.1619179E+02 1.2303954E+02 1.3026762E+02 1.3792070E+02 1.4600020E+02 1.5455339E+02 1.6358449E+02 1.7314375E+02 1.8323845E+02 1.9392220E+02 2.0520570E+02 2.1714629E+02 2.2975850E+02 2.4310384E+02 2.5720117E+02 2.7211664E+02 Center energy ("centE(i), i=1,nen") 1.0000000E-01 3.0000001E-01 5.1144272E-01 7.3498285E-01 9.7131246E-01 1.2211633E+00 1.4853090E+00 1.7645675E+00 2.0598032E+00 2.3719306E+00 2.7019157E+00 3.0507805E+00 3.4196053E+00 3.8095317E+00 4.2217669E+00 4.6575880E+00 5.1183438E+00 5.6054611E+00 6.1204481E+00 6.6648993E+00 7.2405005E+00 7.8490338E+00 8.4923840E+00 9.1725416E+00 9.8916140E+00 1.0651827E+01 1.1455534E+01 1.2305224E+01 1.3203528E+01 1.4153228E+01 1.5157263E+01 1.6218742E+01 1.7340954E+01 1.8527370E+01 1.9781666E+01 2.1107723E+01 2.2509649E+01 2.3991785E+01 2.5558720E+01 2.7215303E+01 2.8966665E+01 3.0818230E+01 3.2775730E+01 3.4845222E+01 3.7033119E+01 3.9346195E+01 4.1791611E+01 4.4376934E+01 4.7110176E+01 4.9999794E+01 5.3054737E+01 5.6284466E+01 5.9698978E+01 6.3308846E+01 6.7125244E+01 7.1159996E+01 7.5425591E+01 7.9935234E+01 8.4702888E+01 8.9743317E+01 9.5072128E+01 1.0070582E+02 1.0666183E+02 1.1295862E+02 1.1961566E+02 1.2665358E+02 1.3409416E+02 1.4196045E+02 1.5027679E+02 1.5906894E+02 1.6836412E+02 1.7819110E+02 1.8858032E+02 1.9956395E+02 2.1117599E+02 2.2345239E+02 2.3643117E+02 2.5015251E+02 2.6465891E+02 2.8000000E+02 Energy grid width ("ddeng(i), i=1,nen") 1.9900000E-01 2.0000002E-01 2.2288537E-01 2.2419488E-01 2.4846435E-01 2.5123739E-01 2.7705407E-01 2.8146291E-01 3.0900860E-01 3.1524611E-01 3.4472418E-01 3.5300541E-01 3.8464403E-01 3.9520884E-01 4.2926121E-01 4.4238091E-01 4.7913074E-01 4.9510384E-01 5.3487015E-01 5.5403233E-01 5.9716988E-01 6.1989689E-01 6.6680336E-01 6.9351196E-01 7.4463272E-01 7.7579308E-01 8.3162117E-01 8.6775970E-01 9.2884827E-01 9.7055054E-01 1.0375195E+00 1.0854397E+00 1.1589813E+00 1.2138519E+00 1.2947388E+00 1.3573761E+00 1.4464760E+00 1.5177956E+00 1.6160736E+00 1.6970940E+00 1.8056297E+00 1.8974991E+00 2.0175018E+00 2.1214828E+00 2.2543106E+00 2.3718414E+00 2.5189896E+00 2.6516571E+00 2.8148270E+00 2.9644089E+00 3.1454773E+00 3.3139801E+00 3.5150452E+00 3.7046890E+00 3.9281006E+00 4.1414032E+00 4.3897858E+00 4.6295013E+00 4.9058075E+00 5.1750488E+00 5.4825745E+00 5.7848053E+00 6.1272278E+00 6.4663391E+00 6.8477478E+00 7.2280884E+00 7.6530762E+00 8.0794983E+00 8.5531921E+00 9.0310974E+00 9.5592651E+00 1.0094696E+01 1.0683746E+01 1.1283508E+01 1.1940582E+01 1.2612213E+01 1.3345337E+01 1.4097351E+01 1.4915466E+01 1.5766724E+01 Phase Angles in Ascending Order {0->90=fd}, {90->180=fu} -------------------------------------------------------- "nang" : Number of phase angles "angzb(iang), iang=1,nang" : Phase angles 8 "nang" 21.4764 47.9337 70.7307 86.0186 93.9814 109.2694 132.0663 158.5236 Corresponding cosines ("xmu(iang), iang=1,nang") 0.9305681586266 0.6699905395508 0.3300094604492 0.0694318413734 -0.0694318413734 -0.3300094604492 -0.6699905395508 -0.9305681586266 Corresponding gaussian weight factors ("weight(iang), iang=1,nang") 0.1739274263382 0.3260725736618 0.3260725736618 0.1739274263382 0.1739274263382 0.3260725736618 0.3260725736618 0.1739274263382 Downward flux [cm-2.s-1.eV-1.sr-1] Angle, cosines, gaussian weights and fluxes ("fxdown(i,iang), i=1,nen") Printed again for "iang = 1, md2" where "md2" is "nang/2" 21.4764 0.9305681586266 0.1739274263382 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 47.9337 0.6699905395508 0.3260725736618 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 70.7307 0.3300094604492 0.3260725736618 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 86.0186 0.0694318413734 0.1739274263382 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 Upward flux [cm-2.s-1.eV-1.sr-1] Angle, cosines, gaussian weights and fluxes ("fxup(i,iang), i=1,nen") Printed again for "iang = 1, md2" where "md2" is "nang/2" 93.9814 -0.0694318413734 0.1739274263382 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 109.2694 -0.3300094604492 0.3260725736618 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 132.0663 -0.6699905395508 0.3260725736618 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 158.5236 -0.9305681586266 0.1739274263382 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 1.0000000E-33 Number of excitation states "nbrexc" : 19 Number of ion states "nbrionst" : 25 STATPROXY.F has finished ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- FELINPROXY.F - Calculate the photoabsorption cross sections. Note: "f107" = 67.20 : Solar 10.7-cm line output ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- DEGRAD.F - Calculate the differential cross sections. DEGRAD, specie number: 1 DEGRAD, specie number: 2 DEGRAD, specie number: 3 DEGRAD, specie number: 4 DEGRAD, specie number: 5 DEGRAD, specie number: 6 DEGRAD : Elastic cross-sections done DEGRAD : Inelastic cross-sections done REDIST started with specie 1 . REDIST started with specie 2 . REDIST started with specie 3 . REDIST started with specie 4 . REDIST started with specie 5 . REDIST started with specie 6 . Degradation cross-sections done Secondary distribution from Rees et al., PSS 17, 1997, 1969 ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- Entering longitude / latitude loops. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -90.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _A_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -90.0. ----> "chideg" 90.00 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -90.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -90.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -90.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -85.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _B_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -85.0. ----> "chideg" 86.47 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -85.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -85.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -85.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -80.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _C_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -80.0. ----> "chideg" 82.95 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -80.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -80.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -80.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -75.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _D_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -75.0. ----> "chideg" 79.46 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -75.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -75.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -75.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -70.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _E_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -70.0. ----> "chideg" 76.01 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -70.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -70.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -70.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -65.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _F_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -65.0. ----> "chideg" 72.62 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -65.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -65.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -65.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -60.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _G_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -60.0. ----> "chideg" 69.31 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -60.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -60.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -60.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -55.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _H_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -55.0. ----> "chideg" 66.09 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -55.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -55.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -55.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -50.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _I_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -50.0. ----> "chideg" 62.99 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -50.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -50.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -50.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -45.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _J_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -45.0. ----> "chideg" 60.02 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -45.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -45.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -45.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -40.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _K_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -40.0. ----> "chideg" 57.23 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -40.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -40.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -40.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -35.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _L_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -35.0. ----> "chideg" 54.63 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -35.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -35.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -35.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -30.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _M_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -30.0. ----> "chideg" 52.27 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -30.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -30.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -30.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -25.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _N_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -25.0. ----> "chideg" 50.18 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -25.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -25.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -25.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -20.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _O_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -20.0. ----> "chideg" 48.39 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -20.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -20.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -20.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -15.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _P_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -15.0. ----> "chideg" 46.96 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -15.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -15.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -15.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -10.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Q_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -10.0. ----> "chideg" 45.90 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -10.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -10.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -10.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE -5.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _R_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude -5.0. ----> "chideg" 45.26 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude -5.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude -5.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE -5.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 0.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _S_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 0.0. ----> "chideg" 45.04 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 0.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 0.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 0.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 5.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _T_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 5.0. ----> "chideg" 45.26 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 5.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 5.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 5.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 10.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _U_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 10.0. ----> "chideg" 45.90 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 10.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 10.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 10.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 15.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _V_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 15.0. ----> "chideg" 46.96 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 15.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 15.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 15.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 20.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _W_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 20.0. ----> "chideg" 48.39 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 20.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 20.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 20.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 25.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _X_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 25.0. ----> "chideg" 50.18 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 25.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 25.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 25.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 30.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Y_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 30.0. ----> "chideg" 52.27 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 30.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 30.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 30.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 35.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Z_A STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 35.0. ----> "chideg" 54.63 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 35.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 35.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 35.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 40.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _A_B STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 40.0. ----> "chideg" 57.23 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 40.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 40.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 40.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 45.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _B_B STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 45.0. ----> "chideg" 60.02 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 45.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 45.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 45.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 50.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _C_B STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 50.0. ----> "chideg" 62.99 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 50.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 50.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 50.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 55.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _D_B STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 55.0. ----> "chideg" 66.09 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 55.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 55.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 55.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 60.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _E_B STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 60.0. ----> "chideg" 69.31 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 60.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 60.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 60.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 65.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _F_B STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 65.0. ----> "chideg" 72.62 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 65.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 65.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 65.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 70.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _G_B STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 70.0. ----> "chideg" 76.01 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 70.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 70.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 70.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 75.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _H_B STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 75.0. ----> "chideg" 79.46 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 75.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 75.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 75.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 80.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _I_B STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 80.0. ----> "chideg" 82.95 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 80.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 80.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 80.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 85.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _J_B STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 85.0. ----> "chideg" 86.47 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 85.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 85.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 85.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 45.0 AND LATITUDE 90.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _K_B STATIONO.F - 1D atmosphere setup for longitude 45.0 and latitude 90.0. ----> "chideg" 90.00 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 45.0 and latitude 90.0. TRANS.F - Solve the kinetic transport equation for longitude 45.0 and latitude 90.0. KINETIC LOOP FOR LONGITUDE 45.0, AND LATITUDE 90.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -90.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _L_B STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -90.0. ----> "chideg" 90.00 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -90.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -90.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -90.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -85.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _M_B STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -85.0. ----> "chideg" 86.79 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -85.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -85.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -85.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -80.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _N_B STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -80.0. ----> "chideg" 83.60 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -80.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -80.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -80.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -75.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _O_B STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -75.0. ----> "chideg" 80.43 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -75.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -75.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -75.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -70.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _P_B STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -70.0. ----> "chideg" 77.31 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -70.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -70.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -70.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -65.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Q_B STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -65.0. ----> "chideg" 74.25 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -65.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -65.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -65.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -60.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _R_B STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -60.0. ----> "chideg" 71.27 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -60.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -60.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -60.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -55.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _S_B STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -55.0. ----> "chideg" 68.38 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -55.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -55.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -55.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -50.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _T_B STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -50.0. ----> "chideg" 65.62 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -50.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -50.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -50.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -45.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _U_B STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -45.0. ----> "chideg" 62.99 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -45.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -45.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -45.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -40.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _V_B STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -40.0. ----> "chideg" 60.53 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -40.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -40.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -40.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -35.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _W_B STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -35.0. ----> "chideg" 58.26 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -35.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -35.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -35.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -30.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _X_B STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -30.0. ----> "chideg" 56.21 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -30.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -30.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -30.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -25.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Y_B STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -25.0. ----> "chideg" 54.40 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -25.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -25.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -25.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -20.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Z_B STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -20.0. ----> "chideg" 52.88 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -20.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -20.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -20.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -15.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _A_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -15.0. ----> "chideg" 51.66 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -15.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -15.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -15.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -10.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _B_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -10.0. ----> "chideg" 50.77 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -10.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -10.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -10.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE -5.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _C_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude -5.0. ----> "chideg" 50.22 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude -5.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude -5.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE -5.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 0.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _D_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 0.0. ----> "chideg" 50.04 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 0.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 0.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 0.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 5.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _E_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 5.0. ----> "chideg" 50.22 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 5.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 5.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 5.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 10.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _F_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 10.0. ----> "chideg" 50.77 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 10.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 10.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 10.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 15.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _G_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 15.0. ----> "chideg" 51.66 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 15.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 15.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 15.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 20.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _H_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 20.0. ----> "chideg" 52.88 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 20.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 20.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 20.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 25.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _I_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 25.0. ----> "chideg" 54.40 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 25.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 25.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 25.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 30.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _J_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 30.0. ----> "chideg" 56.21 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 30.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 30.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 30.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 35.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _K_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 35.0. ----> "chideg" 58.26 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 35.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 35.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 35.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 40.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _L_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 40.0. ----> "chideg" 60.53 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 40.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 40.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 40.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 45.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _M_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 45.0. ----> "chideg" 62.99 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 45.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 45.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 45.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 50.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _N_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 50.0. ----> "chideg" 65.62 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 50.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 50.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 50.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 55.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _O_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 55.0. ----> "chideg" 68.38 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 55.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 55.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 55.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 60.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _P_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 60.0. ----> "chideg" 71.27 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 60.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 60.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 60.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 65.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Q_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 65.0. ----> "chideg" 74.25 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 65.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 65.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 65.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 70.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _R_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 70.0. ----> "chideg" 77.31 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 70.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 70.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 70.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 75.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _S_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 75.0. ----> "chideg" 80.43 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 75.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 75.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 75.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 80.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _T_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 80.0. ----> "chideg" 83.60 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 80.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 80.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 80.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 85.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _U_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 85.0. ----> "chideg" 86.79 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 85.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 85.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 85.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 50.0 AND LATITUDE 90.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _V_C STATIONO.F - 1D atmosphere setup for longitude 50.0 and latitude 90.0. ----> "chideg" 90.00 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 50.0 and latitude 90.0. TRANS.F - Solve the kinetic transport equation for longitude 50.0 and latitude 90.0. KINETIC LOOP FOR LONGITUDE 50.0, AND LATITUDE 90.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -90.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _W_C STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -90.0. ----> "chideg" 90.00 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -90.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -90.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -90.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -85.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _X_C STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -85.0. ----> "chideg" 87.14 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -85.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -85.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -85.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -80.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Y_C STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -80.0. ----> "chideg" 84.29 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -80.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -80.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -80.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -75.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Z_C STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -75.0. ----> "chideg" 81.47 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -75.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -75.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -75.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -70.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _A_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -70.0. ----> "chideg" 78.70 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -70.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -70.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -70.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -65.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _B_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -65.0. ----> "chideg" 75.99 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -65.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -65.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -65.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -60.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _C_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -60.0. ----> "chideg" 73.35 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -60.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -60.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -60.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -55.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _D_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -55.0. ----> "chideg" 70.81 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -55.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -55.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -55.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -50.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _E_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -50.0. ----> "chideg" 68.39 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -50.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -50.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -50.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -45.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _F_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -45.0. ----> "chideg" 66.10 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -45.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -45.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -45.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -40.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _G_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -40.0. ----> "chideg" 63.96 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -40.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -40.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -40.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -35.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _H_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -35.0. ----> "chideg" 62.01 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -35.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -35.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -35.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -30.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _I_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -30.0. ----> "chideg" 60.25 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -30.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -30.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -30.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -25.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _J_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -25.0. ----> "chideg" 58.71 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -25.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -25.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -25.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -20.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _K_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -20.0. ----> "chideg" 57.42 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -20.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -20.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -20.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -15.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _L_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -15.0. ----> "chideg" 56.39 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -15.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -15.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -15.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -10.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _M_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -10.0. ----> "chideg" 55.65 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -10.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -10.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -10.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE -5.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _N_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude -5.0. ----> "chideg" 55.19 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude -5.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude -5.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE -5.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 0.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _O_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 0.0. ----> "chideg" 55.04 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 0.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 0.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 0.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 5.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _P_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 5.0. ----> "chideg" 55.19 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 5.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 5.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 5.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 10.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Q_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 10.0. ----> "chideg" 55.65 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 10.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 10.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 10.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 15.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _R_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 15.0. ----> "chideg" 56.39 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 15.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 15.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 15.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 20.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _S_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 20.0. ----> "chideg" 57.42 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 20.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 20.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 20.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 25.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _T_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 25.0. ----> "chideg" 58.71 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 25.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 25.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 25.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 30.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _U_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 30.0. ----> "chideg" 60.25 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 30.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 30.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 30.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 35.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _V_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 35.0. ----> "chideg" 62.01 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 35.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 35.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 35.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 40.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _W_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 40.0. ----> "chideg" 63.96 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 40.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 40.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 40.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 45.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _X_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 45.0. ----> "chideg" 66.10 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 45.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 45.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 45.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 50.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Y_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 50.0. ----> "chideg" 68.39 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 50.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 50.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 50.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 55.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Z_D STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 55.0. ----> "chideg" 70.81 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 55.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 55.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 55.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 60.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _A_E STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 60.0. ----> "chideg" 73.35 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 60.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 60.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 60.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 65.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _B_E STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 65.0. ----> "chideg" 75.99 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 65.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 65.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 65.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 70.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _C_E STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 70.0. ----> "chideg" 78.70 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 70.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 70.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 70.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 75.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _D_E STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 75.0. ----> "chideg" 81.47 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 75.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 75.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 75.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 80.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _E_E STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 80.0. ----> "chideg" 84.29 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 80.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 80.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 80.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 85.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _F_E STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 85.0. ----> "chideg" 87.14 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 85.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 85.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 85.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 55.0 AND LATITUDE 90.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _G_E STATIONO.F - 1D atmosphere setup for longitude 55.0 and latitude 90.0. ----> "chideg" 90.00 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 55.0 and latitude 90.0. TRANS.F - Solve the kinetic transport equation for longitude 55.0 and latitude 90.0. KINETIC LOOP FOR LONGITUDE 55.0, AND LATITUDE 90.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -90.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _H_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -90.0. ----> "chideg" 90.00 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -90.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -90.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -90.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -85.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _I_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -85.0. ----> "chideg" 87.51 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -85.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -85.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -85.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -80.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _J_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -80.0. ----> "chideg" 85.03 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -80.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -80.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -80.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -75.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _K_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -75.0. ----> "chideg" 82.57 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -75.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -75.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -75.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -70.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _L_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -70.0. ----> "chideg" 80.17 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -70.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -70.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -70.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -65.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _M_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -65.0. ----> "chideg" 77.82 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -65.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -65.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -65.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -60.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _N_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -60.0. ----> "chideg" 75.54 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -60.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -60.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -60.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -55.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _O_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -55.0. ----> "chideg" 73.36 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -55.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -55.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -55.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -50.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _P_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -50.0. ----> "chideg" 71.28 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -50.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -50.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -50.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -45.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Q_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -45.0. ----> "chideg" 69.32 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -45.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -45.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -45.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -40.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _R_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -40.0. ----> "chideg" 67.51 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -40.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -40.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -40.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -35.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _S_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -35.0. ----> "chideg" 65.85 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -35.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -35.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -35.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -30.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _T_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -30.0. ----> "chideg" 64.37 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -30.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -30.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -30.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -25.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _U_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -25.0. ----> "chideg" 63.09 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -25.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -25.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -25.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -20.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _V_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -20.0. ----> "chideg" 62.01 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -20.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -20.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -20.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -15.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _W_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -15.0. ----> "chideg" 61.16 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -15.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -15.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -15.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -10.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _X_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -10.0. ----> "chideg" 60.54 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -10.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -10.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -10.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE -5.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Y_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude -5.0. ----> "chideg" 60.17 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude -5.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude -5.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE -5.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 0.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Z_E STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 0.0. ----> "chideg" 60.04 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 0.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 0.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 0.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 5.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _A_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 5.0. ----> "chideg" 60.17 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 5.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 5.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 5.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 10.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _B_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 10.0. ----> "chideg" 60.54 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 10.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 10.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 10.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 15.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _C_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 15.0. ----> "chideg" 61.16 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 15.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 15.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 15.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 20.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _D_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 20.0. ----> "chideg" 62.01 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 20.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 20.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 20.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 25.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _E_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 25.0. ----> "chideg" 63.09 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 25.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 25.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 25.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 30.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _F_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 30.0. ----> "chideg" 64.37 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 30.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 30.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 30.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 35.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _G_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 35.0. ----> "chideg" 65.85 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 35.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 35.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 35.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 40.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _H_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 40.0. ----> "chideg" 67.51 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 40.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 40.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 40.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 45.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _I_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 45.0. ----> "chideg" 69.32 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 45.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 45.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 45.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 50.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _J_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 50.0. ----> "chideg" 71.28 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 50.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 50.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 50.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 55.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _K_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 55.0. ----> "chideg" 73.36 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 55.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 55.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 55.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 60.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _L_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 60.0. ----> "chideg" 75.54 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 60.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 60.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 60.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 65.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _M_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 65.0. ----> "chideg" 77.82 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 65.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 65.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 65.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 70.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _N_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 70.0. ----> "chideg" 80.17 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 70.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 70.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 70.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 75.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _O_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 75.0. ----> "chideg" 82.57 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 75.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 75.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 75.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 80.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _P_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 80.0. ----> "chideg" 85.03 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 80.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 80.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 80.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 85.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _Q_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 85.0. ----> "chideg" 87.51 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 85.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 85.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 85.0 FINISHED. ---------------------------------------------------------------------------------- ---------------------------------------------------------------------------------- KINETIC MODEL LOOP FOR LONGITUDE 60.0 AND LATITUDE 90.0 STARTING. REFER TO OUTPUT FILES WITH SUFFIX: _R_F STATIONO.F - 1D atmosphere setup for longitude 60.0 and latitude 90.0. ----> "chideg" 90.00 [deg] SZA. ----> STATIONO : Creating the background neutral atmosphere. ----> MARSNEUTRE : (within MARSATMO.f) reading the binary file "marsatmo.dat". ----> MARS_ATMO_TIM : (within MARSATMO.f) working with MarTIM. ----> COLDEN : Calculating column density. ----> STATIONO : Writing the handover variables. FELIN.F - Primary photoproduction calculation for longitude 60.0 and latitude 90.0. TRANS.F - Solve the kinetic transport equation for longitude 60.0 and latitude 90.0. KINETIC LOOP FOR LONGITUDE 60.0, AND LATITUDE 90.0 FINISHED. ---------------------------------------------------------------------------------- Finished with kinetic code.